Organosilicon Ceramic Neutral Silicone Sealant Stainless Steel Door
Structural Adhesive
Sealant Factory Information:
With 20 years of experience in glue production, the factory covers
an area of 40,000 square meters
equipped with highly mechanized equipment. The daily output is
30,000 pieces and there are more than 200 production and
R & D personnel. The source factory supports OEM/ODM. The products
are cost-effective. We look forward to your consult.
Usage
1. Surface Cleaning Clean the surface of the object to be bonded or
coated thoroughly, and remove rust, dust, oil stains, etc.
2. Application Unscrew (or cut open) the cap of the adhesive tube.
Squeeze the adhesive onto the cleaned surface, distribute it
evenly, and then bring the surfaces to be bonded together and fix
them.
3. Curing Place the bonded or sealed components in the air to allow
them to cure naturally. The curing process starts from the
surface and progresses inward. Within 24 hours (at room temperature
and 55% relative humidity), the adhesive will cure to a
depth of 2 - 4 mm. If the application location is deep, especially
in areas that are not easily exposed to air, the complete curing
time will be extended. If the temperature is low, the curing time
will also be prolonged. A 6 - mm - thick sealant takes more than
7 days to cure completely.
4. After Operation Immediately tighten the cap of any remaining
adhesive and store it in a sealed condition. When using it again,
if there is a small amount of skinning at the opening, remove it,
and it will not affect normal use. During storage, a small amount
of curing may also occur at the tube opening. After removing it,
normal use can be resumed without affecting the product's
performance.
Stainless Steel Doors: Structural bonding and sealing of frames, hinges, and joints.
Ceramic Installations: Securing tiles, panels, and fireplace components in
high-temperature areas.
Industrial Equipment: Sealing ovens, furnaces, exhaust ducts, and machinery exposed to
heat.
Building Facades: Weatherproofing joints in glass curtain walls, metal cladding,
and window frames.
Marine: Sealing boat hatches, portholes, and metal fixtures exposed to
saltwater and UV.
DIY Projects: Home repairs, such as sealing gaps in appliances, chimneys, or
outdoor structures.
High-Temperature Resistance: Withstands continuous exposure to temperatures up to 1200°C,
ensuring durability in extreme heat environments.
Neutral Cure: Non-corrosive formula safe for use on stainless steel, aluminum,
glass, and sensitive substrates.
Structural Strength: Provides robust bonding for load-bearing applications, such as
stainless steel door frames and ceramic installations.
Weatherproof: Resistant to rain, snow, UV rays, and temperature fluctuations,
maintaining integrity outdoors.
Flexibility: Remains elastic after curing, accommodating movement and
vibration without compromising the seal.
Chemical Resistance: Resists common chemicals, oils, and solvents, suitable for
industrial and commercial settings.
Fast Curing: Forms a tack-free surface within hours, with full cure in 24-48
hours for efficient project completion.
White Finish: Offers a clean, aesthetically pleasing appearance for visible
applications.
Factory pictures
Contact:
| WhatsApp | +86 13302391599 |
| Telephone | +86 13302391599 |
| Email | mangrove88@126.com |
FAQ
Q1. When can I receive my products?
A1: Sample order need 1 - 3 days.
Mass production need 7- 10 workdays.
Q2. Can you send me samples for reference?
A2: Yes, we are glad to send you free samples.
Q3. Can you provide OEM service?
A3: Yes, and we can custom the volume and tube package.
Q4: Where is your factory? Can I visit it?
A4:Our factory locate in Guangdong Province, welcome to visit us
anytime!
Q5: What is the payment term that you can provide?
A5: Sample 100% payment.
30% TT prepayment and 70% balance payment for mass order.
