Neutral Silicon Sealant Sausage 500ml Weathering Sealant For Solar
Pv Modules
Factory Information:
With 20 years of glue-making experience, the factory covers an area
of 40,000 square meters, is equipped with highly
mechanized equipment, has a daily output of 30,000 pieces, and more
than 200 production and R&D personnel. The source
factory supports OEM/ODM. The products have high cost performance.
We look forward to your contact.
Component
One Component Adhesive
Storage
Under storage conditions below 27°C and relative humidity below 50%
Main Uses
Glass, ceramics, mirrors, fiberglass, non-oily wood, aluminum
profiles
Product Features:
Excellent Weather Resistance
Can withstand the tests of extreme climate conditions such as
ultraviolet rays, high temperature, low temperature and humidity
when exposed to the outdoor environment for a long time without
performance degradation.
High Light Transmittance
Ensure that light can pass through the colloid efficiently,
reducing light loss and thereby improving the power generation
efficiency of photovoltaic modules.Enable more sunlight to reach
the photovoltaic cells and be converted into electricity.
Good Bonding Performance
Has a strong bonding force with various materials of photovoltaic
modules (such as glass, metal, backplane, etc.), ensuring the
stability of the module structure. Prevent delamination or shedding
under the influence of external forces such as wind and
snow.
Electrical Insulation
Effectively isolate the current, ensure the electrical safety of
the photovoltaic system and prevent problems such as leakage and
short circuit.
Corrosion Resistance
Resist the erosion of pollutants, acid and alkali substances in the
atmosphere and extend the service life of photovoltaic modules.
Anti-Aging Performance:
Not prone to aging or yellowing during long-term use and maintain
stable performance.
High and Low Temperature Resistance
Can still maintain good physical and chemical properties in
extremely cold and high-temperature environments.
Application Scenarios
Photovoltaic module packaging, junction box sealing, frame bonding,
bracket bonding and fixation, etc.
Usage Method:
- Preparation Work:
Ensure the construction surface is clean, dry, free of dust, grease
and moisture. You can use cleaners and rags for- cleaning. Install the glass glue gun in advance.
- Gluing Steps:
Use a utility knife or scissors to cut the mouth of the glass glue
bottle. Pay attention to the appropriate size of the- incision to ensure smooth glue output.
- Load the glass glue bottle into the glue gun and ensure a firm
installation.
Hold the glue gun, align the glue nozzle with the construction
area, and press the trigger of the glue gun at a uniform- speed to extrude the glass glue evenly.
- Construction Skills:
Keep the glue nozzle at a 45-degree angle to the construction
surface when gluing, so that the glue can be- distributed more evenly on the construction surface.
For longer construction joints, you can apply glue in sections.
After each section, use your fingers or tools to- compact and smooth the glue.
- Post-treatment:
After gluing, promptly clean the excess glass glue with a damp
cloth or scraper to avoid difficulty in cleaning after- solidification.
Contact
| WhatsApp | +86 13302391599 |
| Telephone | +86 13302391599 |
| Email | mangrove88@126.com |
Factory Pictures
FAQ
Q1: Wonder if you accept small orders?
A1: Yes, we accept small trial orders. Besides, trial order's
product quality is the same to massive production.
Q2: Can you send samples to test?
A2: Sure, sample is welcomed, while the sample's fare and freight
at your cost.
Q3: Can you do OEM/ODM for me?
A3: Yes, both is available, besides, we have design department, if
you have problems, we can help solve them.
Q4: How can I place the order?
A4: Firstly, confirm PI and pay deposit,then we will arrange sample
and massive production. After finished production, plz pay
the balance before shippment. Then delivery the goods.
