Water proof 750ml Fire Retardant Rated Expansion PU foam Spray
insulation Sealant
Factory Information:
With 20 years of glue-making experience, the factory covers an area
of 40,000 square meters, equipped with highly mechanized
equipment. The daily output is 30,000 pieces, and there are more
than 200 production and R&D personnel. The source factory
supports OEM/ODM. The products have high cost performance. We look
forward to your contact.
DESCRIPTION
Multipurpose large expansion PU foam sealant is an one-component, self-expanding,multipurpose polyurethane foam. This
foam will expand and cure by moisture in the air. It is used for a wide range of
building applications. It is very good for filling and
sealing with excellent mounting capacities, high thermal and
acoustical insulation. Higher expansion rate than normal Pu foam.
ADVANTAGE
1.Can apply around 70 meters ( 30mm*15mm)
2.Most cost effective for each window or door.
3.No shrinkage and cracking after cured.
4.Better adhesion and harder.
APPLICATIONS
1. Bonding and mounting.
2. Installation fixing and insulation of door and window frames
3. Filling and sealing of gaps, joint, openings and cavities.
4. Heat & cold preservation and sound insulation.
5. Packaging purpose, wrap the precious & fragile commodity, shake-
proof and anti-pressure
PACKAGING
300ml, 500ml, 600ml, 750ml four kinds can size
12cans per carton
Two spray methods: straw type and gun type
Gross weight from 300g to 1050g as request
STROREAGE AND SHELF LIFE
12 months in unopened packing store in temperature between +5ºC to
+25ºC, keep in cool, shade and well ventilated area.
Always keep the can with the valve pointed upwards.
CONSTRUCTION GUIDE
1. Shake can vigorously for one minute before use
2. Clean and pre-moisten surface before use
3. Firmly screw can on adapter, and turn the flow adjustment screw
anticlockwise
4. Fill vertical joints from the bottom up when half filled enough
5. Foam begins to cure about ten minutes, wait for one hour before
doing the next step.
6. Use knife to smooth out cured foam and treat surface with cement
paint or silicone.
Factory pictures
FAQ
Q1. When can I receive my products?
A1: Sample order need 1 - 3 days.
Mass production need 7- 10 workdays.
Q2. Can you send me samples for reference?
A2: Yes, we are glad to send you free samples.
Q3. Can you provide OEM service?
A3: Yes, and we can custom the volume and tube package.
Q4: Where is your factory? Can I visit it?
A4:Our factory locate in Guangdong Province, welcome to visit us
anytime!
Q5: What is the payment term that you can provide?
A5: Sample 100% payment.
30% TT prepayment and 70% balance payment for mass order.
