Polyurethane PU Foam Mounting Of Window Door Frames Foam Sealant OEM
Factory Information:
With 20 years of glue-making experience, the factory covers an area of 40,000 square meters, is equipped with highly
mechanized equipment, has a daily output of 30,000 pieces, and more than 200 production and R&D personnel. The source
factory supports OEM/ODM. The products have high cost performance. We look forward to your contact.
large expansion PU foam sealant is an one-component, self-expanding,multipurpose polyurethane foam. This foam will expand
and cure by moisture in the air. It is used for a wide range of building applications. It is very good for filling and sealing with
excellent mounting capacities, high thermal and acoustical insulation. Higher expansion rate than normal Pu foam.
ADVANTAGE
1.Can apply around 70 meters ( 30mm*15mm)
2.Most cost effective for each window or door.
3.No shrinkage and cracking after cured.
4.Better adhesion and harder.
CONSTRUCTION GUIDE
1. Shake can vigorously for one minute before use
2. Clean and pre-moisten surface before use
3. Firmly screw can on adapter, and turn the flow adjustment screw anticlockwise
4. Fill vertical joints from the bottom up when half filled enough
5. Foam begins to cure about ten minutes, wait for one hour before doing the next step.
6. Use knife to smooth out cured foam and treat surface with cement paint or silicone.
| Name | Shockproof and reduced pressure insulation PU foam sealant |
| Volume | 750ml |
| Material | polyurethane |
| Solid Content | 99% |
| Temperature Tolerance Range | 22-50Kpa |
| Shear Strength | structural silicone sealant |
| Specific gravity | 1gm/ml |
| Water Permeability | Impermeable |
| Tack-free time | skins in 10 minutes |
| shelf life | 12 months after production date |
Storage:
Polyurethane sealant.When stored at the recommended conditions in original, unopened containers, this product has a shelf
life of 12 months
(cartridge), 9 months (sausage).The recommended storage temperature is 5-25°C, humidity is <50% RH. It is strictly
prohibited that
the transportation or storage temperature is over 30°C or the humidity is over 80% RH. And high-temperature container
transportation is prohibited as well.
Caution:
1. The sealant is moisture curable, which should be used up once opened.
2. Other application process should be done within skin formation time, or it will affect the adhesion performance.
3. The curing rate is affected by the temperature and humidity. If it cures too fast, the sealant layer may have bubbles, and
affect its quality.
Factory Pictures
Contact
| WhatsApp | +86 13302391599 |
| Telephone | +86 13302391599 |
| Email | mangrove88@126.com |
FAQ
| Q1. When can I receive my products? A1: Sample order need 1 - 3 days. Mass production need 7- 10 workdays. |
| Q2. Can you send me samples for reference? A2: Yes, we are glad to send you free samples. |
| Q3. Can you provide OEM service? A3: Yes, and we can custom the volume and tube package. Q4: Where is your factory? Can I visit it? A4:Our factory locate in Guangdong Province, welcome to visit us anytime! |
| Q5: What is the payment term that you can provide? A5: Sample 100% payment. 30% TT prepayment and 70% balance payment for mass order. |
Guangzhou Mangrove Rubber Industry Co., Ltd.
Guangzhou Mangrove Rubber Industry Co., Ltd.. has a factory area of 40,000 square meters, a production and
R&D team of more than 200 people, and a daily output of 72,000. It owns
Foshan Shouzheng Silicone Co., Ltd.,
Guangzhou Huashikang Environmental Viscose Technology Co., Ltd. and
other companies. It mainly produces
silicone sealants, foaming agents, seam beautifiers, rebar glue and
other products. The products are cost-
effective. We look forward to your visit to the factory
