Polyurethane Foam Sealant Buildings Houses Environmentally Friendly Foam Sealant
Factory Information:
With 20 years of glue-making experience, the factory covers an area of 40,000 square meters, is equipped with highly
mechanized equipment, has a daily output of 30,000 pieces, and more than 200 production and R&D personnel. The source
factory supports OEM/ODM. The products have high cost performance. We look forward to your contact.
| Name | Polyurethane Foam |
| Volume | 750ml, 500ml, 300ml |
| Material | Polyurethane |
| Solid Content | 99% |
| Water Permeability | Impermeable |
| Tack-free Time | Skins in 10 minutes |
| Shelf Life | 12 months after production date |
| Packing | 12pcs/ctn |
| Max Load Quantity In 20GP | 1300cartons without pallets |
| Max Load Quantity In 40HQ | 3000cartons without pallets |
| Carton Size | 28.3x21x34cm or Customized |
| Cure System | Moisture curing |
HONGSHUYE SPRAY INSULATION FOAM is a kind of high thermosetting polyurethane foom. It can form a continuous
thermal insulation layer. It is widely used for roof and wall thermal insulation.
TYPICAL USES :
1. Ideal for ceiling insulation
2. Specialize for narrow and challenging areas
3. Adheres on various construction materials
4. Metal, drywall, brick, concrete, OSB plywood, autoclaved aerated concrete
5. Clapboard, external wall, pipeline
SHELF LIFE : 12 months store in 25°C or below
VOLUME : 750ml, 500ml, 300ml
APPLICATION INSTRUCTIONS
1, Remove the dust, greasy dirt on the surface before construction.
2, Spray a little water on construction surface when the humidity is below 50 degrees, otherwise the heartburn or punch
phenomenon will appear .
3, The flow rate of the foam can be adjusted by the control panel.
4, Shake the container for 1 minute before using, connect material container with spray gun or spray pipe, the filler content is
1/2 of the gap.
5, Use dedicated cleaning agent to clean the gun Surface drying time is about 5 minutes, and it can be cut after 30 minutes,
after 1 hour the foam will be cured and achieve stable in 3-5 hours.
6, This product is not UV-proof, so it is suggested to be cut and coated after the foam curing (such as cement mortar,
coatings,etc.)
7, Construction when temperature is lower than -10 ℃, to ensure the material can be exhausted and increase the foam
expansion, it should be heated by 40 ℃ to 50 ℃ warm water
Factory Pictures
Contact
| WhatsApp | +86 13302391599 |
| Telephone | +86 13302391599 |
| Email | mangrove88@126.com |
FAQ
| Q1. When can I receive my products? A1: Sample order need 1 - 3 days. Mass production need 7- 10 workdays. |
| Q2. Can you send me samples for reference? A2: Yes, we are glad to send you free samples. |
| Q3. Can you provide OEM service? A3: Yes, and we can custom the volume and tube package. Q4: Where is your factory? Can I visit it? A4:Our factory locate in Guangdong Province, welcome to visit us anytime! |
| Q5: What is the payment term that you can provide? A5: Sample 100% payment. 30% TT prepayment and 70% balance payment for mass order. |
